Improper use of a power inverter can even lead to electrocution. For safety reasons, someone attempting to hook an inverter directly to a battery should be sure to read and follow all safety precautions listed in the inverter's instruction booklet. Which am going to show you in these tutorial the safety measures or precaution you must ensure when installing a new power inverter?
The Safety measure you must ensure when installing a new power inverter.
When installing a power inverter, there are safety measures you must ensure, which am going to show you in these post, you should note that Installing of a new inverter to the power mains should be properly arranged and you should keep in mind when installing a new inverter. When connecting to its main. The overall load connected to the inverter must not exceeds it capacity designed, that is, the wattage of inverter. For instance, a 500 watt inverter, the total load should not be more than 300 to 400watt. It is very important that most of the appliances require high stating current during their switching. Therefore, a new inverter installation should be provided a separate wiring. Provide low watt devices like 2fit fluorescent tube (20w), instead of 60w bulb to reduce the consumption rate from the battery. Finally it is advisable to use less wattage devices or home appliances in powering with inverter to have a long duration.
How to test a power inverter
Begin the testing procedure by connecting a 100 watt bulb at the output socket of the inverter
Insert a 15 Amp. /12V fuse inside the fuse holder
Finally connect a 12V automobile battery to the battery inputs of the inverter.
If all the connections are right, the 100 Watt bulb should immediately light up brightly.
Safety you must ensure when using a power inverter
Power inverters should only be used with batteries that are in good condition and fully charged. A weak battery will be drained easily if demand is too high. If used in a car, this could leave a driver stranded, so the battery's condition should be checked before using an inverter in a stationary vehicle. If the inverter is being used while the vehicle is running, as in the case of a road trip, there should be no problem with the extra draw as long as the battery is in good conditions. When using a power inverter continuously inside a vehicle that is not turned on, the engine should be started at least once an hour for 10 to 15 minutes to keep the battery from running down. A vehicle should never be started in a closed garage, as the carbon monoxide in the exhaust is fatal.
Note: Working with large batteries can be dangerous, and when not done properly, can result in serious injury. In my next post I will share with you the types of batteries, advantages and most recommended battery for power inverter.
0 comments:
Post a Comment